ECP 1500

The Eletric Crimp- Press 1500 is an extremely versatile crimp machine for loose individual terminals (contacts), with parallelly closing jaws and adjustable crimp height. When equipped with exchangeable tool holders, all standard matrices (cores) of common hand crimp tools (pincers) can be inserted and used for crimping. When equipped with a table support and the corresponding press sets, flatband connectors can be pressed onto flat band cables (insulation displacement). When equipped with a cable cutter, Cu-cables of up to 50 mm2 can be cut. When equipped with the respective tool holders, all telephone plugs RJ-45, RJ-22, RJ-11 and MMJ in screened and unscreened executions can be processed in an economic way.

Versions and order numbers Processing of RJ-plugs Processing of Stewart RJ-plugs Processing individual contacts Processing of HRS RJ-plug connectors Processing system for flat cable connectors

Parallel pressing, due to "toggle press" principle, ensures optimum press fit. Adjustable parallelism of jaws. Fast cycle time allows aprox. 800 pieces per hour. Return to clear machine or to do adjustments in step mode. Foot pedal switch with protection cover. Rapid tool change, tool-specific finger protection. Limitation of return stroke, important when processing flatband connectors.

Technical Data:

Cycle	< 1 second
Stroke	20 mm (3/4")
Press force	1500 N, 3 mm before lower dead point
Electrical data	230 V / 50 Hz or 115V / 60 cycles
Motor	24 V / 130 W
Counter	5 digits, electronical, zero button
Adjustment of lower dead point	5 mm
Weight	23 kg (51 lbs)
Dimensions (height x width x depth)	350 x 210 x 255 mm (14 x 81/4 x 10")
Typical cross section	< 10 mm2