FT2000 v1.51/11.54
Luckily YAESU is careful to our communications. THANKS!
PLEASE To verify UPDATE AND FULL BUG LIST READ page number
Ver. 0151 MAIN CPU implements improvements (also includes all previous updates):
AGC: Corrected the AGC in the OFF position; if an AGC MENU SET item was changed, the AGCwould sometimes turn ON.
KEYER: The extraneous dot memory is eliminated during rapid keying when the dash output starts.
CAT: Corrected the 1.5 kHz shift when the CAT FA command is used to change the frequency onthe 5MHz band.
SCOPE: The right edge signal position on the display is corrected.
SCOPE: The left edge signal is corrected when the frequency is changed on the display.
Ver. 11.54 EDSP implements improvements (also includes all previous updates):
Corrected FM TX for a slight frequency offset.NOTES:
*Rotate the [METER] switch to select COM (Compression). We recommend setting the PROC level within the 5dB
to 10dB range.
*When menu settings are saved on the DMU-2000 CF card and transferred to the new version, some previous versions
may not transfer correctly. Please check your menu, update the settings, and then save the new settings to the CF card.
???
waiting bug report!